送紙單元FeederUnit
可連續或隔張送紙（有計數器）。
變頻控制真空氣流和壓力，以配合紙板尺寸。
可調整送紙行程，減輕拉紙膠輥壓力。
拉紙膠輥間隙，左右擋紙板位置，電腦控制調整。
后托紙架電腦控制前后，加快設置速度。
多排毛刷及風機清除紙板表面紙屑，提高印刷品質。
送紙壓力輥間隙調整采用電腦控制，控制范圍0-12mm。
壓力輥的動力傳動采用凸輪軸承傳動，減少磨損使傳動更平穩。
主機馬達啟動保護裝置。
送紙單元、印刷單元采用編碼器自動歸零。
一般紙箱使用自動歸零裝置，試印二張即可調整至正確位置，減少紙板浪費。
Can be continuous feeding and skip feeding.
Inverter control the vacuum air and presure,to follow the cardboard size.
Can adjust the feeding proceding to reduce the presure of pushing roller.
Computer control the gap of pushing rollers and the position of both sides guard.
Backside stacker computer control front and backside,increse the speed of set up.
Two wire brush and fan cleanning the scraps of paper in surface of the cardboard.To increase the printing quality.
The adjustment of the gap of pushing rollers adopts computure control,between 0-12mm.
The power transmission system adopts cam bearing transmission,in order to reduce the abrasion and make the transmission more steady Protector of main motor start(The main motor can not start when the machine didn't lock well).
Feeder Unit and Printer Unit adopt encoder making zero.
Ordinary carton producing can use making zero automatic device.The correct position can be adjusted by test printing of few cardboards.In order to not waste cardboard.
|
